Ducts Dampers & Adapters
Tandem Kit with Metal Hood
More than ever, today’s builders and contractors are aiming to optimize material, manpower and time. One way to achieve this goal when installing a ventilation system is to install our new metal tandem hood. This device simplifies the installation not only because only one hole is required on the exterior wall. In fact, every installer knows that locating effi ciently one outside port is easier (and faster) than locating two. Moreover, there is hardly any intercontamination!
Model:
V14695
Accessory Data-ca:
Features
- This combined intake and exhaust termination could be used with a HRV or ERV delivering up to 160 CFM at 0.4 in. w.g.
- Galvannealed satin steel cover grille (ready to be painted to match building’s color).
- One 7” x 18” hole in the exterior wall.
- Complies with ASHRAE 62.2-2016, 2019 section 6.8 exception 4 and 2022 revision section 6.6 exception 4.
- The unique design limits the cross-contamination to less than 5%.